应力条件下压电陶瓷损失机理分析

压电陶瓷材料中主要包括三种不同损失,即介电损失、机械损失和压电损失。为了研究这三种损失的机理并由实验方法分别测量这三种损失的大小,本文利用复参数理论对压电陶瓷材料(PZT-4)建立了使用复参数表示的损失理论模型;讨论了三种损失的物理意义并推导了通过测量等效参数分别计算三种损失的具体方法;测量了在应力条件下压电陶瓷等效电路中的谐振点阻抗、反谐振点阻抗、串连电阻和品质因素的变化情况并以此计算出三种损失随应力的变化。     

内燃机活塞环－缸套摩擦功耗的设计计算方法之研究

以往在计算内燃机活塞环－缸套摩擦副的摩擦功耗时，只是计算活塞环与缸套之间流体润滑剂的粘性剪应力，这显然不能客观地反映出该摩擦副的润滑状态。实际上，活塞环－缸套间的摩擦力产生于两个方面，一是粘性流体的剪应力，二是摩擦界面相互接触峰元的剪切作用。然而截至目前，针对这两方面进行全面分析研究的报道却还很少，因此，为了给低摩擦功耗环组的设计提供科学依据，基于对活塞环在运动过程中润滑状态的分析，提出了一种适用于不同类型内燃机设计计算的活塞环－缸套摩擦功耗的计算方法，并以其对现有结构的Ｓ１９５柴油机活塞环－缸套摩擦副的摩擦功耗进行了计算，同时还对影响摩擦功耗的因素作了考察与讨论，利用台架试验测量油膜厚度的方法对这种算法进行试验验证的研究结果表明，理论值与实测值吻合得很好。     

滤池大阻力配水系统改造的理论与实践

提出了一种对传统滤池支母管穿孔大阻力配水系统改造的理论和方法，并在工程应用中得到了确认     

跨音涡轮叶栅底压的无粘模型

本文提出一个无粘的底部压力模型。证明了在给定反压的情况下,超音出口的涡轮叶栅的叶片尾缘的底压以及叶型损失可由该模型确定。与无粘的流场计算相结合,可用该模型计算二维叶栅的底压。对模型的参数研究表明:具有正曲率的喉道下游叶背型面将有利于减少损失;而出口为音速时流动则最为不利。     

An inviscid model for the base pressure of transonic turbine cascade

An inviscid base pressure model for transonic turbine blade has been presented. It has been shown that for a given back pressure the base pressure at the trailing edge, and the profile loss of a turbine blade are fixed according to the model and the base pressure can be calculated with the help of an inviscid numerical scheme. A parameteric study on the model shows that a blade profile with positive curvature downstream of the throat is advantageous for generating less loss, whilst the worst situation is when the exit flow reaches the sonic condition.     

On the Formation of Discontinuities of Wave Fronts in a Saturated Granular Body

The paper deals with propagation of plane wave fronts in a solid with a non-linear relation between stress and deformation. The objective is to calculate the distance that a wave front covers before it loses continuity. The formulae derived for a general quasi-linear system of two equations are applied to the propagation of plane compression waves in dry and partially saturated granular bodies. In the case of a saturated body with gas bubbles, the influence of gas and capillary pressure on the stiffness of the body is taken into account. Numerical calculations relevant to soil mechanics are presented. For the numerical calculations a constitutive equation of the hypoplasticity theory for granular materials has been used. Received November 1, 1997     

Oscillatory measurements of silicone oils —Loss and storage modulus master curves

The work describes a way to obtain loss modulus and storage modulus master curves from oscillatory measurements of silicone oils.The loss modulus master curve represents the dependence of the viscous flow behavior on · ₀ ^* and the storage modulus master curve — the dependence of the elastic flow behavior on · ₀ ^* .The relation between the values of the loss modulus and storage modulus master curves (at a certain frequency) is a measurement of the viscoelastic behavior of a system. The G/G-ratio depends on · ₀ ^* which leads to a viscoelastic master curve. The viscoelastic master curve represents the relation between the elastic and viscous oscillatory flow behavior.     

傅里叶变换投影栅线法测量大物体的变形

本文利用傅里叶变换投影栅线技术对大物体的离面变形进行了测量，分析了大物体的尺寸给测量过程带来的主要矛盾，讨论了方法的灵敏度和精度，用计算机数值模拟技术给出了大尺寸引起的频率变化所带来的误差。结果表明，傅里叶变换投影栅线技术可以用于大尺寸物体离面变形的精确测量。     

管内固-液两相流动阻力特性影响因素的敏感性分析

在浆体管道的工程设计中，管道阻力损失是一项关键参数。在大量实验的基础上，本文根据取得的有关实验成果，对影响管内固-液两相流动阻力的4个最主要因素-管径D、颗粒比重S、浆体浓度Cv和倾角θ进行了深入探讨，并采用多因素分析法比较了它们对于固体物料管道水力输送阻力输送阻力损失的影响程度大小关系，从而为在工程设计降低管道输送阻力提供了主要调整手段。     

Forced oscillations of a layer of a viscoelastic material under the action of a convective pressure wave

The longitudinal and transverse components of deformation of the surface of a flat layer of a viscoelastic material glued onto a solid base under the action of a traveling pressure wave are determined. The coating compliance is described by two components corresponding to two components of surface displacement. The dimensionless compliance components depend only on the viscoelastic properties of the material, the ratio of the wave length to the layer thickness λ/H, and the ratio of the wave velocity to the velocity of propagation of shear oscillations V/C _t ⁰ . Data on the dynamic compliance are presented for 0.3 < λ/H < 30 and 0.1 < V/C _t ⁰ < 10. The compliance is demonstrated to be determined by its absolute value and by the phase lag of strain from pressure. The effect of viscous losses in the material and compressibility of the latter on the dynamic compliance is analyzed. An anomalous behavior of the compliance with the wave velocity being greater than a certain critical value is explained. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 48, No. 2, pp. 90–97, March–April, 2007.